|
PLEA 2006
23rd International
Conference on
Passive and Low Energy Architecture
Geneva Switzerland 6 – 8 September 2006
Day 3, 8th September 11:00
Technical sessions Paper/Vol.-Page
Auditorium Paxton - Architectural education for
sustainable design
1. Communication platform for
knowledge transfer in housing design process
Bing CHEN, Adrian PITTS 141/142 / l-629
2. Australian approach to sustainable design
professional development education
Stephen BERRY, Tony MARKER, Caitlin McGEE 869 /
l-641
3. Applications and developments of blended
learning course ecology in
architectural design
P. CAPUTO, W. WEBER, P. HAEFELI, I REGA 991 /
l-647
4. Centres for regenerative studies: graduate
studio experiences in education for
sustainable design
Robert KOESTER 986 / l-659
5. Implementing building energy simulation into
the design process: a teaching
experience in Brazil
S. DELBIN, V. GOMES da SILVA, D. KOWALTOWSKI, L.
LABAKI 106 / ll-755
6. Education in environmental construction at
the University of Plymouth:
the eco-house project
Pieter de Wilde, Brian PILKINGTON 184 / ll-773
7. Sustainability education: addressing practice
and attitude
Paola SASSI 504 / ll-793
Technical sessions
Trombe Hall - Design strategies and tools
1. The use of analyses for a
better environment in early design for a
Stanford University building
Isabelle LAVEDRINE, Cole ROBERTS, Tom BAUER 636
/ l-317
2. alter-CLIM: a decision tool for passive and
hybrid thermal control strategies
Geoffrey van MOESEKE 205 / l-251
3. Crucial building parameters as a novel
approach for the design of passive
solar houses in a Mediterranean climate
Ernst MÜLLER 550 / l-257
4. An energy efficient office building in a
tropical climate: the INPE-CRN’s project
in Natal, Brazil
A. de OLIVEIRA, H. MARANHÃO BRITTO, S. CIRNE
TRINDADE, R. De MATOS,
P. de FARIA RANGEL, L. De CUNHA, A. PEDRINI 179
/ ll-419
5. Improving comfort and energy efficiency in a
nursery school design process
S. FERRARI, G. MASERA, D. Dell’ORO 995 / ll-425
6. Permeability, Porosity and Better Ventilated
Design for High Density Cities
Edward Ng, Hyuk-Hien Wong and Meiqi Han 643 /
l-329
Technical sessions
Bowen Hall – Design strategies and tools
1. Integration of
sustainability in the design process of
contemporary architectural practice
Maureen TREBILCOCK, Brian FORD, Robin WILSON 724
/ l-245
2. An energy-efficient simulation-assisted
lighting control system for buildings
Ardeshir MAHDAVI, Bojana SPASOJEVIC 861 / l-565
3. The use of genetic algorithms for a net-zero
energy solar home design optimisation tool
Rémi CHARRON, Andreas ATHIENITIS 146 / l-215
4. Mapping tools for a sustainable building
cycle
Geert-Jan van den BRAND 893 / l-363
5. Design strategies in steady-state systems
Matteo CLEMENTI 738 / ll-183
6. Using axiomatic design to support sustainable
projects at São Paulo, Brazil
V. Graça, D. LIMA, J. BUDA, J. PETRECHE 798 /
ll-819
14:00 Technical sessions
Auditorium Paxton – Design strategies and tools
1. Potential for passive
cooling of buildings by night-time ventilation
in present and
future climates in Europe
Nikolai ARTMANN, Heinrich MANZ, Per HEISELBERG
200 / ll-339
2. Natural ventilation through buried pipes in a
small school in Viamão, Brazil
Diego MUSSKOPF, Miguel SATTLER 568 / ll-345
3. Ventilated façade design in hot and humid
climate
Matthias HAASE, Alex AMATO 510 / l-281
4. A new ventilation and thermal storage
technique for passive cooling of buildings:
thermal phase-shifting
Pierre HOLLMULLER, Bernard LACHAL, Jean-Marc
ZGRAGGEN 942 / l-541
5. Influence of ventilation mode on passive
cooling effect – a proposal of flex vent system
Y. KODAMA, K. TAKEMASA, F. MIYAOKA, C. HASUI 240
/ ll-357
6. The impact of façade designs: orientations,
window to wall ratios and shading
devices on indoor environment for naturally
ventilated residential buildings in Singapore
Li-Ping WANG, Nyuk-Hien WONG 578 / l-293
Technical sessions
Trombe Hall - Design strategies and tools
1. Assessment of the effects
of environmental factors on air flow in and
around buildings
K-P LAM, S. HAY, P. SATWIKO, J. JENNINGS, J.
COLE 926 / l-337
2. Application of multicriteria optimization in
wind flow analysis
Katarzyna KLEMM, Hanna JEDRZEJUK, Wojciech MARKS
815 / ll-323
3. Impact on water consumption by cooling
equipment in arid region of Mexico
Luis Carlos HERRERA, Gabriel GÓMEZ-AZPEITIA 149
/ ll-381
4. Design guidelines for direct ground cooling
systems in different climates
Adriana ANGELOTTI, Giulio SOLAINI 616 / ll-363
5. Integral design methodology for collaborative
design of sustainable roofs
E. QUANJEL, W. ZEILER, W. BORSBOOM, H.
SPOORENBERG 161 / ll-195
6. Criterion for the design on the building
envelope related to ecological sensitivity in
tourism buildings in the Mediterranean region,
Turkey
Ersin ACAR, Deniz Erinsel ÖNDER 707 / ll-285
Technical sessions
Bowen Hall - Design strategies and tools
1. Integraton of daylight
quality in the design studio: from research to
practice
Marie-Claude DUBOIS 320 / l-671
2. Experimental laboratory for teaching
architecture lighting in a virtual learning
environment
Veridiana ATANASIO, Fernando PEREIRA, Alice
PEREIRA 107 / ll-761
3. Assessing a rapid technique for estimating
the daylight transmittance of atrium roofs
Dan LASH, Steve SHARPLES 197 / l-169
4. Simplified on-site method for evaluation
solar shading performance of advanced windows
Takashi INOUE, Masashi MOMOTA 704 / l-175
5. A design method for fixed outside solar
shading device
Barbara MATUSIAK 194 / l-151
6. Development of a probe for measuring in-situ
the thermal properties of building materials
Brian PILKINGTON, Pieter de Wilde, Steve GOODHEW,
Richard GRIFFITHS 185 / ll-665
|